Silage Equip

$6,990.00 +gst

2016 Albutt 2.2m Shear grab with JCB back hitch.

Price Reduced Was $7,500 Now $6,990

Location: Rotorua

$2,900.00 +gst

Giltrap M50H Feed Wagon, centre feed, single axle, an oldie but a goodie in good operating condition. Trade to clear.

Located at our Cambridge Branch

$7,250.00 +gst

Prodig Grapple buckets ranging in sizes from 1.5m 1.8m 2.1m and 2.4m . Can offer a tele-handler version in 1,9m 2.3m 2.5m with different cubic capacity's.

Ideal for efficient handling of maize, manure, recycling etc on tractor loaders. Heavy duty 8mm wall box section and 10mm plate in grapple constructions. 25mm thick curved profile Hardox tines.

Grapple buckets starting at $7,250+GST

Get in touch with Giltrap AgriZone for more information.

$17,480.00 +gst

The Prodig Mega Bite is an all in one large capacity shear grab that can cut large blocks from the silage clamp/pit and split round bales while retaining the net and plastic. This unit reduces feeding time by up to 30%, making farmers more efficient and increasing profits.

Large capacity grab in widths from 1.5m to 2.5m. Priced from $17480+GST

The ideal attachment for use in conjunction with diet feeders.

Cuts clamp/pit silage, maize, whole crop, etc.

Wide opening shear to split round bales in half.

Plastic film retainer to hold film and netting when splitting bales.

8mm Optim 650 plate used in 1.5m model to reduce weight for use on tractors.

25mm Hardox tines use in fork base for extreme strength.

The full range of Hardox tines are manufactured incorporating a replaceable wear tip meaning the tine never has to be replaced. Hardox cutting edge and shear blades for superior cut and long life.

Nickel chrome plated hydraulic Rams for long life in an aggressive environment.

For more information get in touch with Giltrap AgriZone or visit www.prodigattachments.co.nz/

$33,600.00 +gst

In stock now and ready to go! JCB brackets to suit wheel loader 414 / 435 etc. or other brackets as required, This an awesome heavy duty fork manufactured in Ireland designed for stacking silage. 12 foot (3.65m) that folds to 2.5m for transport. Indestructible Hardox tines. Well priced unit for immediate delivery. can also supple 13foot,14foot and 16foot

From $33,600 + GST

$9,250.00 +gst

Giltrap Agrizone offers the Prodig Tine Grab, in 1.5m and 1.8m ( priced is the 1.5m tine grab ) Comes standard with euro hitch but can change hitch on request ( in some cases the change of hitch may incur an extra charge )

25mm Hardox upper and lower tines with 8mm box section framing, nice and strong r795mm opening so you can grab bales or silage with ease. Prodig Implements are highly reputable Irish made products. The company has been around for 20 years making agricultural and construction equipment and it's built to last ! Phone Giltrap AgriZone for more information or to find your closet dealer

$28,500.00 +gst

Brand New Prodig Push Off grass forks bucket rakes, in 2.5m 2.75m, 3m 3.3m or 3.6m ( pictured is 3m ), comes standard with Hardox tines, heavy duty construction, 1400mm square profile Hardox tines incorporating replicable wear tips, 40mm pivot pins, hardened cutting edge wear plates on bottom section. Fitted standard with hyd equaliser valve and buffer pads. Priced from 27000+GST

Contact Giltrap AgriZone for more information

$17,280.00 +gst

The Prodig Shear Genius is the ultimate attachment for the farmer who diet feeds. This unit is a shear grab, bale splitter with plastic/net retainer and loading bucket all in one!

It can reduce feed waste by up to 15% and reduce feeding time by up to 30%.

Available in sizes from 1.5m 1.8m and 2.2m. Priced from $17280+GST

Hardox cutting edges and shear blades.

Comes standard with bolt on hitch covering all loaders makes and telehandler makes: JCB , Manitou , Dieci , Merlo, Massey Ferguson, New Holland.

Contact Giltrap AgriZone for more information

$10,600.00 +gst

Prodig Shear Grabs in 1.5m 1.8m and 2.2m with Hardox tines and replaceable tips. Hardox cutting blades for longer life heavier front ( 10mm ) and side walls ( 12mm ) than most others on the market.

Bolt on hitch on all models so we can easily change to your style of hitch upon request.

Prices from $10600+GST

Contact Giltrap AgriZone for more information

$4,990.00 +gst

Sigma4 Silage Grab, 2.2 metre wide, 10 tines, twin hydraulic rams, fitted with MX Brackets.

Located at our Otorohanga Branch